Q. How many lights can I add to my Malibu System?

A. Add lights as desired keeping total bulb wattage at or below the power pack rating.

Q. Can I mix bulb wattages?

A. Yes. You can have a variety of bulb wattages, allowing for flexibility in your lighting system.  As you add fixtures of different wattages, be sure the total watts in the system do not exceed the power pack rating.

Q. What if total bulb wattage exceeds my power pack rating?

A. Malibu offers several power pack models with different wattage ratings. You could add a second power pack, splitting the load between 2 power packs, or purchase a power pack with a wattage rating high enough to handle the entire load.

Q. What type of power receptacle should I plug my power pack into?

A. An outdoor, 120 volt (standard U.S. household current) power outlet with a GFCI (ground fault circuit interrupt) receptacle is required.  This receptacle should also utilize a while-in-use weatherproof cover, designed to protect the plugs that are in it.

Q. Can you connect a power pack to an electrical outlet with an extension cord?

A. No. Extension cords should not be used. Mount the power pack within 1 foot of a covered outdoor GFCI AC outlet.

Q. Do I need to bury my low voltage cable?

A. No. Exposed cable is weatherproof and shockless. However, for better appearance, hide cable with mulch, rocks, etc.

Q. Do I need to tape or seal the end of the cable?

A. No. Simply straight-cut exposed wire so it is flush with the insulated covering.